ATEN Altusen KH1516A User Manual page 43

Setting
SCAN/SKIP Selects which computers will be accessed under Skip mode (see F5:
MODE SKP, page 36), and Auto Scan mode (see F7: SCAN, page 38).
Choices are:
ALL
ACCESSIBLE PORTS, page 33);
QUICK VIEW
have been selected as Quick View Ports (see SET QUICK VIEW
PORTS, page 32);
POWERED ON
and are Powered On;
QUICK VIEW + POWERED ON
set Accessible and have been selected as Quick View Ports and are
Powered On. The default is ALL.
SCREEN If there is no input from the console for the amount of time set with this
BLANKER function, the screen is blanked. Key in a value from 1–30 minutes,
then press [Enter]. A setting of 0 disables this function. The default is
Off.
HOTKEY Enables / Disables the Hotkey function (see Hotkey Operation,
COMMAND page 41), in case a conflict with programs running on the computers
MODE occurs. The default is On.
HOTKEY This setting selects the Hotkey invocation keys (see Hotkey Operation,
page 41). Choices are [NUM LOCK] + [-], or [CTRL] + [F12]. The
default is [NUM LOCK] + [-].
SET OSD Sets the language that the OSD displays in. Choices are: English,
LANGUAGE German, Japanese, Simplified Chinese and Traditional Chinese.The
default is English.
SET Sets the keyboard language mapping of the console keyboard. The
CONSOLE default is Auto. If the switch does not automatically receive language
KEYBOARD mapping from the keyboard, it will set to English (US).
SET LOGOUT If there is no input from the console for the amount of time set with this
TIMEOUT function, the operator is automatically logged out. A login is necessary
before the console can be used again.
This enables other operators to gain access to the computers when
the original operator is no longer accessing them, but has forgotten to
log out. To set the timeout value, key in a number from 1–180 minutes,
then press [Enter]. If the number is 0 (zero), this function is disabled.
Default is Off.
Note: This feature does not function if Set Login Mode is disabled.
See SET LOGIN MODE, page 35.
ACTIVATE Choices are Y (for Yes), or N (for No). When activated, the beeper
BEEPER sounds whenever a port is changed, when activating the Auto Scan
function (see F7: SCAN, page 38), or an invalid entry is made on an
OSD menu. The default is On.
–
All the ports which have been set Accessible (see SET
–
Only those ports which have been set Accessible and
–
Only those ports which have been set Accessible
Chapter 4. OSD Operation
Function
–
Only those ports which have been
31