Table of Contents
Advertisement
CLI Commands, Continued...
Show or Clear the Last System Error
Command Name
Description
Syntax
Parameters
Example
Notes
Show System Information
Command Name
Description
Syntax
Parameters
Example
Notes
(Revised 2011-11-15)
For Sales and Support, Contact Walker EMD • www.walkeremd.com • Toll-free: (800) 876-4444 • Tel: (203) 426-7700 • Fax: (203) 426-7800
Syserr
Show or clear the last system error
If clear is not supplied, then the last system error is displayed.
syserr [clear]
Clear
Clear the last system error.
N-TRON/Admin> syserr
Last System Error: None.
N-TRON/Admin> syserr clear
Last System Error: Cleared.
Sysinfo
Show system information
Sysinfo
None
N-TRON/Admin> sysinfo
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+
+ Model:
7026TX
+ Boot Loader:
BL 2.0.5.1 (0x02000501)
+ OS Version:
3.4.3
+ Build Date:
Aug
2 2010 at 16:13:22
+ Copyright:
Copyright (c) 2008-2010 N-TRON Corporation All rights
reserved.
+
+ Processor:
66 MHz (66000000)
+ SDRAM Size:
16 MB
+ Flash Size:
8 MB
+ File System:
6422528 Bytes, 2621440 Free, 3801088 Used, 0 Bad
+ MAC Address:
00:07:af:fe:27:40
+ IP Address:
192.168.1.201
+ Subnet Mask:
255.255.255.0
+ Gateway:
192.168.1.1
+ Cfg Device:
Not connected
+
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Page 148 of 169
Advertisement
Table of Contents
