Table of Contents
Advertisement
CLI Commands, Continued...
Configuration Device Operations
Command Name
Description
Syntax
Parameters
Example
Notes
(Revised 2011-11-15)
For Sales and Support, Contact Walker EMD • www.walkeremd.com • Toll-free: (800) 876-4444 • Tel: (203) 426-7700 • Fax: (203) 426-7800
cfgdev
Info, Format, Compare and Erase Configuration Device.
CfgDev info | format [-m model] | compare | erase
Info
Show information about the configuration device.
Format
Format the configuration device to factory default.
-m model
Configuration device model number. Valid values are:
1=At32K, 2=At64K, and 3=card.
Compare
Compare the configuration of the switch to the configuration device.
Erase
Erase the switch configuration on the configuration device.
N-TRON/Factory> cfgdev info
Port A:
0xd080
Board ID:
0x0005 (5)
Configuration device information:
Name
: SDS128M
Model
: 3
Version
: 1
Page Size
: 200
Total Size
: 127008768
Max Clock (Hz)
: 400000
Write Cycles (ns): 5000000
Flags
: 0x00000001
N-TRON/Factory> cfgdev compare
Comparing switch configuration to the configuration device...
The configurations are different.
N-TRON/Factory> cfgdev erase
Erasing configuration device...
Configuration device erase completed.
Page 139 of 169
Advertisement
Table of Contents
