CLI Commands, Continued...
Show or Clear the Last System Error
Command Name
Description
Syntax
Parameters
Example
Notes
Show System Information
Command Name
Sysinfo
Description
Show system information
Syntax
Sysinfo
Parameters
None
Example
N-TRON/Admin> sysinfo
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+
+ N-TRON 700/7000/7500 Series
+
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+
+ Model:
+ Boot Loader:
+ OS Version:
+ Build Date:
+ Copyright:
+
+ Processor:
+ SDRAM Size:
+ Flash Size:
+ File System:
+ MAC Address:
+ IP Address:
+ Subnet Mask:
+ Gateway:
+ Cfg Device:
+
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
N-TRON/Admin>
Notes
(Revised 2012-05-01)
Syserr
Show or clear the last system error
If clear is not supplied, then the last system error is displayed.
syserr [clear]
Clear
Clear the last system error.
N-TRON/Admin> syserr
Last System Error: None.
N-TRON/Admin> syserr clear
Last System Error: Cleared.
7012FX2
BL 2.0.5.1 (0x02000501)
3.4.6
Sep 14 2010 at 10:18:23
Copyright (c) 2008-2010 N-TRON Corp. All rights reserved.
66 MHz (66000000)
16 MB
8 MB
6422528 Bytes, 2599936 Free, 3822592 Used, 0 Bad
00:07:af:fa:bc:80
192.168.1.201
255.255.255.0
192.168.1.1
SDS128M
Page 150 of 170