Table of Contents
Advertisement
CLI Commands, Continued...
Show or Set IGMP Configuration
Command Name
Description
Syntax
Parameters
Examples
NOTES
(Revised 2011-11-15)
For Sales and Support, Contact Walker EMD • www.walkeremd.com • Toll-free: (800) 876-4444 • Tel: (203) 426-7700 • Fax: (203) 426-7800
Igmp
Show or set IGMP configuration. If no parameters are specified, this command will show
the IGMP configuration (same as -show parameter).
igmp [-show] [-status state]
-show
Show configuration.
-status state
Set the IGMP status to e(nabled) or d(isabled).
N-TRON/Admin> igmp –show
IGMP Status
IGMP Version
Query Mode
CIP Querier Status
Active Querier IP
Router Mode
Manual Router Ports
IGMP Number of Groups : 1
IGMP Resource Usage % : 1
N-TRON/Admin> igmp –status disabled
IGMP Status
IGMP Version
Query Mode
CIP Querier Status
Active Querier IP
Router Mode
Manual Router Ports
IGMP Number of Groups : 1
IGMP Resource Usage % : 1
N-TRON/Admin>...
: Enabled
: 2
: Auto
: 2, Active-Auto
: 192.168.1.250
: Auto
: (None)
: Disabled
: 2
: Auto
: 2, Active-Auto
: 192.168.1.250
: Auto
: (None)
Page 142 of 169
Advertisement
Table of Contents
