N-Tron 7026 Series User Manual & Installation Manual page 98

N-Link – Configuration, Continued...
Complex N-Link Configuration (Example):
N-Ring
Auto
Member
Control
Link #1
N-Ring AM N-Ring AM
Partner
N-Link Master N-Link Slave
Link #1
#1
Primary Standby
Coupler Coupler
Link #1 Link #1
N-Link AC N-Link AC
N-Ring AM N-Ring AM
N-Ring #2
N-Ring
N-Rng
Auto
Manager
Member Member
Configuration Notes:
 The Master and Slave must be part of the N-Ring topology.
 If using default configuration choices, the administrator only needs to configure the N-Link Master.
The N-Link Slave and both Coupler switches will auto-detect any needed configuration.
 If not using default configuration choices, the administrator may also need to configure the Default
Coupler port on the N-Link Slave.
 There must be a direct link between the Master and Slave Control ports. Use of media converters or
other switches is not supported.
 There must be a direct link between the Master and Slave Partner ports. Use of media converters or
other switches is not supported.
 There must be at least one other switch, besides the Master and Slave, that supports N-Link on the
N-Ring.
 N-Link will only support a single point of failure. Multiple points of failure and misconfiguration
are not supported and may cause a network storm under some circumstances.
Configuration Steps to redundantly couple 2 N-Ring networks:
1. Ensure the Coupler and Control cables are disconnected at this point.
2. Get Both N-Rings working with a status of OK.
3. Configure N-Link Slave: Ensure that the N-Link Slave is set to Auto Configure and select a Default
Coupler Port. Save Configuration.
4. Configure N-Link Master: Select the Control and Coupler ports. Save the Configuration.
5. Connect the Control Link cable. Ensure that the Slave switch status now shows a state of ―Slave‖
6. Connect the Coupler Link cables.
7. Check N-Link status by selecting the N-Link Status View page.
(Revised 2011-11-15)
For Sales and Support, Contact Walker EMD • www.walkeremd.com • Toll-free: (800) 876-4444 • Tel: (203) 426-7700 • Fax: (203) 426-7800
N-Ring AM
N-Link Master
#1 #2
Primary
Coupler
Link #2
N-Link AC
N-Ring AM
N-Ring #3
N-Ring N-Ring
Auto Auto
Member
N-Rng
Manager
N-Ring #1
Control
Link #2
N-Ring AM
Partner
N-Link Slave
Link #2
#2
Standby
Coupler
Link #2
N-Link AC
N-Ring AM
N-Ring
N-Rng
Auto
Manager
Member
N-Ring
Auto
Member
Control
Link #3
N-Ring AM N-Ring AM
Partner
N-Link Master N-Link Slave
Link#3
#3 #3
Primary Standby
Coupler Coupler
Link #3 Link #3
N-Link AC N-Link AC
N-Ring AM N-Ring AM
N-Ring #4
N-Ring N-Ring
N-Rng
Auto Auto
Manager
Member Member
Page 98 of 169