Table of Contents
Advertisement
CLEANING
Clean only with a damp cloth.
RACK AND PANEL MOUNTING
The 7026 Series comes configured with standard rack mount brackets which may be used to mount our
products to standard 19" racks. As an alternative we offer our 7026 Panel Mount Assembly (P/N: 7026-
PM) which may be used to securely mount the 7026 Series products to a panel or other flat surface.
A clearance of 1 inch should be observed on the sides, back, top and bottom to allow proper ventilation.
Also a cable bend radius of 2 inches should be observed for the front and back side of the unit.
▪PANEL MOUNTING
▪RACK MOUNTING
From Left to Right:
RJ45 Ports
Auto Sensing 10/100 Base-TX Connections
Gigabit Ports
1000 Base SFP Copper or Fiber Transceivers (Optional)
LED lights when Power is supplied to the unit
(Revised 2011-11-15)
For Sales and Support, Contact Walker EMD • www.walkeremd.com • Toll-free: (800) 876-4444 • Tel: (203) 426-7700 • Fax: (203) 426-7800
Page 10 of 169
Advertisement
Table of Contents
