CLI Commands, Continued...
Show or Clear the Last System Error
Command Name
Description
Syntax
Parameters
Example
Notes
Show System Information
Command Name
Description
Syntax
Parameters
Example
Notes
(Revised 2012-05-01
Syserr
Show or clear the last system error
If clear is not supplied, then the last system error is displayed.
syserr [clear]
Clear
Clear the last system error.
N-TRON/Admin> syserr
Last System Error: None.
N-TRON/Admin> syserr clear
Last System Error: Cleared.
Sysinfo
Show system information
Sysinfo
None
N-TRON/Admin> sysinfo
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+
+ N-TRON 700/7000/7500 Series
+
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+
+ Model:
710FX2
+ Boot Loader:
BL 2.0.5.1 (0x02000501)
+ OS Version:
3.2.1
+ Build Date:
Dec
+ Copyright:
Copyright (c) 2008-2009 N-TRON Corp. All rights
reserved.
+
+ Processor:
66 MHz (66000000)
+ SDRAM Size:
16 MB
+ Flash Size:
8 MB
+ File System:
6422528 Bytes, 2907136 Free, 3515392 Used, 0 Bad
+ MAC Address:
00:07:af:fd:64:60
+ IP Address:
192.168.1.214
+ Subnet Mask:
255.255.255.0
+ Gateway:
192.168.1.1
+ Cfg Device:
Not connected
+
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
N-TRON/Admin>
8 2009 at 15:10:57
Page 149 of 170