CyberPower OL6KRTMB Installation And Operation Manual page 29

USING THE UPS SYSTEM CONT.
LCD Control Panel Main Menu
Press "ENTER" button to enter the "Main Menu".
MAIN MENU
Information
Configure
Event Log
LCD Information Readout
There are 24 types of UPS information available for display.
1. Press the "ENTER" button to enter the "Main Menu".
2. Press the " " and " " buttons to scroll to the "Information" option.
3. Press the "ENTER" button to select the "Information" submenu.
4. Press the " " and " " buttons to scroll through the "Information" items shown in the table below.
5. Press the "ESC" button to return to the UPS Status.
INFORMATION
MENU ITEMS
O/P Volt
O/P Freq
I/P Volt
I/P Freq
O/P Load
O/P Amp
O/P Watt
O/P VA
Load Energy
BAT Volt
BAT Cap
BAT Runtime
EBM Number
TEMP
SBM
Rating
MCU Ver
Model Name
Displays the UPS information.
Displays the UPS settings that can be configured by the user.
Displays the 5 most recent events, by event count, time (day/hour/minute), and
event description.
DATA
DISPLAYED
= XXX.XV Displays the Output Voltage
= XX.XHz Displays the Output Frequency
= XXX.XV Displays the Input Voltage
= XX.XHz Displays the Input Frequency
= XXX% Displays the Output Load as a Percentage of Maximum Load
= X.XA Displays the Output Current
= XXXXXW Displays the Output Wattage
= XXXXXVA Displays the Output VA
XXXX.XKWh Display UPS Load Energy Consumption
= XXX.XV Displays the Battery Voltage
= XXX% Displays the Estimated Percentage of Battery Capacity
= XXXM Displays the Estimated Battery Runtime in Minutes
= X Displays the Number of Extended Battery Modules Configured
= XX°C / Displays the Approximate Internal UPS Temperature in both °C
XXX°F (Celsius) and °F (Fahrenheit)
= XXXXX Displays the stage of Smart Battery Management with Operation
XH(M) Time
= XXK VA Displays the UPS Rating
XXXX Displays the MCU Firmware Version
Displays the UPS Model Name
©2020 Cyber Power Systems (USA), Inc. All rights reserved. All other trademarks are the property of their respective owners.
DESCRIPTION
DESCRIPTION
23