Table of Contents
Advertisement
EXTENDED BATTERY MODULE
INSTALLATION CONT.
CONNECTION WITH POWER MODULE CONT.
Step 1: Turn o the DC breaker on the EBM.
Step 2: Loosen the two screws to remove the battery cable retention bracket of the power module.
Step 3: Use the output cable of the EBM to connect the EBM to the Power module.
Step 4: Rotate the battery cable retention bracket and tighten the two screws to fix battery cable.
Step 5: Use a power cord to plug AC input inlet of the battery module into a wall receptacle.
Step 6: Turn on the DC breaker of the EBM.
Connection #2: Power module with multiple battery modules
1
OFF
4
©2020 Cyber Power Systems (USA), Inc. All rights reserved. All other trademarks are the property of their respective owners.
2
6
ON
17
Advertisement
Table of Contents
