Stopping Rtmp/Rtmps Streaming - Sony PXW-Z190T Operating Instructions Manual

"Connecting to the Internet" (page 57)
or "Connecting to Other Devices via
LAN" (page 51).
2
Set RTMP/RTMPS >Setting in the
Network menu to On.
RTMP/RTMPS streaming starts according to
the settings.
You can also start streaming by assigning the
RTMP/RTMPS function to an assignable
button (page 40) and pressing the button.
Notes
• RTMP/RTMPS streaming cannot be started under the
following menu settings.
 When Network Client Mode >Setting in the
Network menu is set to On
 When Streaming >Setting in the Network menu is
set to On
 When Rec Format >Codec in the System menu is
set to DVCAM(MXF)
 When S&Q Motion >Setting in the Recording
menu is set to On
 When Interval Rec >Setting in the Recording menu
is set to On
 When Simul Rec >Setting in the Recording menu is
set to On
• It may take several tens of seconds to stream actual
video or audio after starting RTMP/RTMPS
streaming.
• If the RTMP/RTMPS streaming transmission
destination setting is invalid or the camcorder does not
connect to the network, "×" appears on the screen as
the RTMP/RTMPS streaming status indicator.
• Audio/video data is transmitted as-is via the Internet.
Accordingly, the data may be disclosed to other
parties. Check that the RTMP/RTMPS streaming data
is being received by the receiving device. Data may be
transmitted to a third party if the address or other
settings are configured incorrectly.
• Not all frames may be played, depending on the status
of the network.
• The picture quality may deteriorate in scenes with
excessive motion.
• Not all frames may be played when the RTMP/
RTMPS stream is set to a large size with a small bit
rate. To reduce this, select a smaller size format for the
Streaming Format setting.
• Starting RTMP/RTMPS streaming while monitoring
will stop the monitoring.
• File transfer is not supported during RTMP/RTMPS
streaming. File transfer is supported after stopping
RTMP/RTMPS streaming.
• If RTMP/RTMPS streaming is started during file
transfer, the file transfer stops. File transfer restarts
after stopping RTMP/RTMPS streaming.
• During RTMP/RTMPS streaming, the screen
information update frequency is reduced, but this does
not affect operation.
• The recording settings cannot be changed during
RTMP/RTMPS streaming.
• The distribution formats available for streaming vary
depending on the Rec Format setting of the camcorder.
Stopping RTMP/RTMPS
streaming
Set RTMP/RTMPS >Setting in the Network
menu to Off.
Streaming stops.
You can also stop streaming by pressing an
assignable button assigned with the RTMP/
RTMPS function.
68