Setting The Streaming - Streaming Menu; Streaming Tab - Sony BRC-X401 Operating Instructions Manual

Setting the Streaming
— Streaming Menu
When you click
menu, the Streaming menu appears.
Use this menu to set the items for the
transmission by unicast or multicast.
The Streaming menu consists of the [Streaming]
tab.

Streaming tab

When Streaming tab settings are changed, RTSP
streaming is temporarily interrupted. Therefore,
while you display the viewer on another web
browser, the screen turns black for a moment.
Unicast streaming
RTSP video port number [1 to 3]
Specify the video transmission port number used for
RTSP unicast streaming. The default setting is 51000,
53000 or 55000. Specify an even number from
[1024] to [65534]. 2 port numbers (the number
specified here and an odd number with 1 added to
the specified number) are actually used for video
data communication and control. When performing
simultaneous multi-transmission, a different port
number will be used for every transmission, based
on the port number specified here.
The settings for Image 1, Image 2 and Image 3 apply
to RTSP video port number 1, 2 and 3 respectively.
RTSP audio port number
Specify the audio transmission port number used for
RTSP unicast streaming. The default setting is
57000. Specify an even number from [1024] to
[65534]. 2 port numbers (the number specified here
and an odd number with 1 added to the specified
number) are actually used for audio data
communication and control. When performing
simultaneous multi-transmission, a different port
in the Administrator
number will be used for every transmission, based
on the port number specified here.
Multicast streaming
Set whether the camera uses multicast
streaming with video data and audio data or not.
It reduces the transmission load on the camera
by having a computer of the same segment
network receive the same transmitting data.
Enable
Select the checkbox to allow multicast streaming.
When you have selected the checkbox, set
[Multicast address], [Video port number], and [Audio
port number] properly.
Multicast TTL
Set the TTL (Time To Live) for the multicast packet.
Adjust the value when you want to perform the
multicast across the router.
Multicast address
Set the multicast address used on the RTSP
multicast streaming.
Video port number [1 to 3]
Specify the video transmission port number used for
RTSP multicast streaming. The default setting is
61000, 63000 or 65000. Specify an even number
from [1024] to [65534]. 2 port numbers (the number
specified here and an odd number with 1 added to
the specified number) are actually used for video
data communication and control.
The settings for Image 1, Image 2 and Image 3 apply
to video port number 1, 2 and 3 respectively.
Audio port number
Specify the audio transmission port number used for
RTSP multicast streaming. The default setting is
59000. Specify an even number from [1024] to
[65534]. 2 port numbers (the number specified here
and an odd number with 1 added to the specified
number) are actually used for audio data
communication and control.
RTSP setting
Set the RTSP setting which cannot be set in the
Unicast streaming setting and Multicast
streaming.
Enable
Select the checkbox to enable RTSP streaming.
RTSP port number
Set the port number used for RTSP streaming. The
default setting is 554.
If you change the setting, the RTSP server will be
rebooted.
92