Proxy Recording; Supported Sd Cards; Formatting (Initializing) Sd Cards - Sony PXW-Z190T Operating Instructions Manual

<?xml version="1.0"
sp sp
UTF-8"?>3
<PlanningMetadata xmlns="http://
sp
xmlns.sony.net/pro/metadata/
planningmetadata" assignId="
sp
P0001" creationDate="
sp
2011-08-20T17:00:00+09:00"
lastUpdate="
2011-09-28T10:30:00+09:00"
version="1.00">3
<Properties propertyId="
sp
assignment" update="
sp
2011-09-28T10:30:00+09:00"
modifiedBy="Chris">3
<Title usAscii="
sp
xml:lang="en">
</Title>3
</Properties>3
</PlanningMetadata>3
Notes
• When you create a file, enter each statement as a single
line by breaking a line with a carriage return only after
the last character of the line, and do not enter spaces
except where specified with "sp."
• A string of up to 44 bytes (or 44 characters) is valid as
a clip name.
If the UTF-8 format string exceeds 44 bytes, the first
44 bytes are used as the clip name.
If only a string in ASCII format is specified, the ASCII
format name up to the 44th character is used as the clip
name.
When neither the ASCII format name string nor UTF-
8-format name string is valid, a clip name in the
standard format is used.
Using a clip name defined in planning
metadata
Load a planning metadata file that contains the
clip name into the memory of the camcorder, then
select Clip Naming (page 110) >Auto Naming
>Plan in the Media menu.
Clip names are generated by adding an
underscore (_) and a 5-digit serial number (00001
to 99999).
Example: Typhoon_Strikes_00001,
Typhoon_Strikes_00002, ...
Notes
• If the serial number reaches 99999, it returns to 00001
upon the next recording.
• When you load another planning metadata file, the
5-digit serial number returns to 00001.
encoding="
sp
sp
sp
Typhoon
"
sp
Typhoon_Strikes

Proxy Recording

You can record proxy data on an SD card in the
UTILITY SD/MS slot simultaneously while
recording to the memory cards in the memory
card slots.

Supported SD cards

SDXC memory cards* (Speed Class: 4 or
higher)
SDHC memory cards* (Speed Class: 4 or
higher)
SD memory cards* (Speed Class: 4 or higher)
* Referred to as "SD card" in this document.

Formatting (initializing) SD cards

SD cards must be formatted the first time they are
used in the camcorder.
SD cards for use in the camcorder should be
formatted using the format function of the
camcorder. If a message appears when the SD
card is inserted into the camcorder, format the SD
card.
1
Insert the SD card media into the
UTILITY SD/MS slot (page 9) with the
label facing right.
2
Select Format Media (page 109)
>Utility SD/MS >Execute in the Media
menu. When a confirmation message
appears, select Execute again.
A message and progress status are displayed
while formatting is in progress, and the
access lamp is lit red.
When formatting is completed, a completion
message is displayed. Press the SET button
or SEL/SET dial to dismiss the message.
Notes
• Formatting an SD card erases all data on the card. The
card cannot be restored.
• SDXC cards are formatted in exFAT, SDHC cards are
formatted in FAT32, and SD cards are formatted in
FAT.
49