Status Screen - Sony PXW-Z190T Operating Instructions Manual

Intercom connection icon indicators
Connection status
• Network Client Mode is Off
• Network Client Mode is On and
headset not connected
• Network Client Mode is On
• Headset connected
• Headset connection supported,
but not connected (connection
ready state)
• Network Client Mode is On
• Headset connected
• Intercom connection disabled
state
• Network Client Mode is On
• Call ready state, with headset
and intercom connected
Network client mode icon indicators
Networkt Connection
Network Client status
ModetSetting
Off –
On Normal
Disconnected
(standby)
Connection
error
Streaming icon indicators
Networkt Connection
Streamingt status
Setting
Off –
On Normal
(Streaming is
in progress)
Configuring
(Transitioning
to streaming)
Transmission
error
RTMP/RTMPS streaming icon indicators
Networkt Connection
RTMP/ status
RTMPSt
Setting
Off –
Icon
None
Digital UWP unit RF level icon indicators
Icon
None
Icon
None
You can check the settings and status of the
camcorder on the status screen.
Status screen operations
To display the status screen:
• Push the STATUS CHECK button.
To switch the status screen:
• Turn the SEL/SET dial or press the V/v button.
Icon
To hide the status screen:
• Push the STATUS CHECK button.
Camera Status screen
None Displays the picture quality, zoom settings, and
status.
15
Networkt Connection
RTMP/ status
RTMPSt
Setting
On Normal
(RTMP
streaming is in
progress)
Configuring
(Transitioning
to RTMP
streaming)
Transmission
error
Transmitter Reception
status status
Powered off Not
receiving
Normal transmission Receiving
state
Muted state Receiving
(muted)
Remaining battery Receiving
capacity warning
state
Muted / Remaining Receiving
battery capacity
warning state

Status screen

Icon
Icon
~
(4-level signal
strength indicator)
(Icon flashing)
(Icon flashing)