Messages If Camcorder Operation Cannot Be Executed - Sony PXW-Z190T Operating Instructions Manual

Messages if camcorder operation cannot be executed

The camcorder operation may not be able to be
executed in some cases, depending on the camera
status and individual settings.
If this occurs, the following types of messages are
displayed on the LCD/viewfinder screen for 3
seconds.
Check the message, and then resolve the problem.
Cases where the cause can be identified
The operation that cannot be performed is
displayed on line 1.
The cause is displayed on lines 2 and 3.
Example 1: Cause is white balance A setting
Cannot Proceed
White: A
Example 2: Cause is recording format setting
Cannot Proceed
XAVC-I
1920×1080 59.94i
Cases where the cause cannot be
identified
The operation that cannot be performed is
displayed on line 1.
The probable cause is displayed on lines 2 and 3.
Example 1: Presumed cause is white balance A
setting
Cannot Proceed. Possible Factor
White: A
Example 2: Presumed cause is recording format
setting
Cannot Proceed. Possible Factor
XAVC-I
1920×1080 59.94i
158