Starting Network Client Mode; Starting/Stopping Streaming In Network Client Mode; Stopping Network Client Mode - Sony PXW-Z150 Firmware Update

Starting network client mode

1
Select (NETWORK SET)
[NETWORK CLIENT MODE]
[EXECUTE].
2
Select the connection method
(wired/wireless).
The camcorder connects to the CCM.
Streaming is enabled after connecting
to the CCM.
1 2 3
NETWORK CLIENT MODE
CCM : Sony CCM
SSID : XXX - XXXXXXXX
A Wi-Fi or LAN
B NETWORK CLIENT MODE
C Streaming status indicator
For details, see "Icon display"
(page 12).
D*CCM name (set on the CCM side)
E*SSID of access point (when
wireless is selected)
* 4 and 5 are only displayed
immediately after connecting to the CCM.
b Note
• For details about limitations when running
in network client mode, see "Function
limitations" (page 13).
z Tips
• You can assign the network client mode
start/stop function (NETWORK CLIENT
MODE) to an ASSIGN button.
• The frame rate of the streaming data will
vary depending on the recording settings
for the original file. For details, see
"Network client mode supported formats"
(page 10).
• For details about supported operations on
the camcorder in network client mode, see
"Network client mode operations and
display" (page 12).
GB
8
t
STRM
Starting/stopping streaming in
network client mode
t
Streaming is started/stopped by the CCM.
For details, refer to the operating
instructions of the CCM.

Stopping network client mode

1
Stop recording, if currently
recording.
(Network client mode cannot be
stopped while recording.)
2
Press one of the following.
4
• MENU button
5
• ASSIGN button assigned with the
network client mode start/stop
function
3
Select [YES] on the confirmation
screen.
Network client mode stops.