Table of Contents
Advertisement
7) Go to DHCP Server to disable the DHCP on Router 2. Now you have finished all settings on Router 2 required for WDS.
2. Configure Router 1:
Go to wireless section on Router 1 and specify WDS (or WDS Bridge) as its wireless working mode.
1.
Manually enter Router 2's MAC address (Also, you can use the Scan option as mentioned above) and click OK to finish your settings.
2.
2.5 Wireless Connection Status
Here you can see a list of wireless devices connected to the router, including their MAC addresses and bandwidth
Note
:
The bandwidth here refers to the channel bandwidth instead of wireless connection rate.
.
27
User Guide
Advertisement
Table of Contents
