Table of Contents
Advertisement
User Guide
2. Connect one of the LAN ports on the Device to the NIC port on your PC using an Ethernet cable.
3. Connect the Ethernet cable from Internet side to the WAN port on the device. If it is connected to the telephone line, please link the telephone
line to the MODEM and connect the MODEM to the WAN port on the device.
4. When connected, log in to Web manager to set up Internet connection.
2 Internet Connection Setup
2.1 Configure PC
Configure your PC obtain IP address automatically. If you are not clear about this, please refer to
Appendix 1 Configure
PC.
2.2 Log in to Web Manager
1. Launch a web browser, such as IE Web browser;
2. In the address bar, input 192.168.0.1 and press Enter;
.
1
Advertisement
Table of Contents
