Time Settings; Change Password; Upgrade - Tenda FH305 User Manual

OK: Click to activate your settings.

Note:
To access the device via port 8080, enter "http://x.x.x.x:8080" where "x.x.x.x" represents the the device's Internet IP address and 8080 is the

remote admin port. Assuming the device's Internet IP address is 220.135.211.56, then, simply replace the "x.x.x.x" with "220.135.211.56"
(namely, http://220.135.211.56:8080).
Leaving the IP address field at "0.0.0.0" makes the device remotely accessible to all the PCs on Internet or other external networks;

populating it with a specific IP address, say, 218.88.93.33, makes the device only remotely accessible to the PC at the specified IP address.

6.6 Time Settings

This page is used to set the router's system time. You can choose to set the time manually or get the GMT time from the Internet and the system
will automatically connect to NTP server to synchronize the time.
Note:
Configured time and date info will be lost when the device gets disconnected from power supply. However, it will be updated automatically
when the device reconnects to Internet. To activate time-based features (e.g. firewall), the time and date info shall be set correctly first, either
manually or automatically.

6.7 Change Password

This section allows you to change login password for accessing device's Web-based interface for better security.
New Password: Enter a new password, say, 12345 (Note that the password can only be alphanumeric).

Confirm New Password: Re-enter the new password for confirmation.

OK: Click to activate your settings.

Note:
For security purpose, it is highly recommended that you change Device's default login password.

6.8 Upgrade

Firmware upgrade is released periodically to improve the functionality of your device and also to add new features. If you run into a problem
with a specific feature of the device, log on to our website (www.tendacn.com) to download the latest firmware to update your device.
.
38
User Guide