3.
To permit a wireless device to connect to your wireless network, select Permit, enter its MAC address, click Add and then OK. Then only
this device listed as "Permitted" will be able to connect to your wireless network; all other wireless devices will forbidden.
Example:
To forbid the PC at the MAC address of C8:3A:35:65:82:E6 from connecting to your wireless network, do as follows:
Step1. Select an SSID, say, Tenda_178ED8.
Step2. Select Forbid from the corresponding drop-down menu.
Step3. Enter C8:3A:35:65:82:E6 in the MAC address box and click Add.
Step4. Click OK to save your settings. You can add more wireless MAC addresses you wish to forbid.
Wireless Extender
WISP Mode
If your router acquires Internet access from a wireless Access Point, please select WISP mode. Specific steps are as follows:
Click Wireless>Wireless Extender, select WISP mode and click Open Scan.
.
20
User Guide