Tenda FH305 User Manual page 21

1450, 1400, etc.
Address Mode: Select "Dynamic" if you don't get any IP info from your ISP, otherwise select "Static". Consult your ISP if you are not

clear.
IP Address: Enter the IP address provided by your ISP. Consult your ISP if you are not clear.

Subnet mask: Enter the subnet mask provided by your ISP.

Gateway: Enter the WAN Gateway provided by your ISP. Consult your ISP if you are not clear.

Note:
PPPOE, PPTP and L2TP cannot be used simultaneously!

For PPTP and L2TP Internet connections, only Static IP or Dynamic IP is available.

Note that PPTP and L2TP may not be available on some products.

PPPoE Dual Access
PPPoE dual access only supported in special Area e.g.Russia.
Internet connection Type: Displays the current Internet connection type.

PPPoE User Name: Enter the User Name provided by your ISP.

PPPoE Password: Enter the password provided by your ISP.

MTU: Maximum Transmission Unit. DO NOT change it from the factory default value unless necessary.

Service Name: Description of PPPoE connection. Leave blank unless otherwise required.

Server Name: Description of server. Leave blank unless otherwise required.

Address Mode: Select "Dynamic" if you don't get any IP info from your ISP, otherwise select "Static". Consult your ISP if you are

not clear.
IP Address: Enter the IP address provided by your ISP. Consult your ISP if you are not clear.

Subnet mask: Enter the subnet mask provided by your ISP.

.
14
User Guide