Verify Internet Connection Settings - Tenda FH305 User Manual

User Guide

3 Verify Internet Connection Settings

System automatically skips to the status page when you finish all needed settings on the home page. Here you can see the system status and
WAN connection status of the device.
1. If you find "Connected" and a WAN IP address displayed there (as shown below), you have got a wired internet access now.
If connection status displays "Disconnected" and there is no WAN IP address displayed (as seen below), connection between the
Internet-enabled modem and your device may have failed. Please double check or re-connect all involved devices and cables properly and then
refresh the page. If nothing is wrong, "Connecting" or "Connected" will be displayed.
If "Connecting" is displayed and no WAN IP address is seen, try refreshing the page five times. And if it still displays "Connecting" try steps
below:
1). Contact your ISP for assistance if you are using the DHCP connection type.
2). Read the connection diagnostic info on WAN status.
.
4