Tenda FH305 User Manual page 32

Click Wireless>Wireless Basic Settings to check router one's wireless basic settings.
Click Wireless>Wireless Security to check router one's wireless security settings.
Verify that DHCP server is enabled on Router 1: Click Advanced>DHCP Server.
5. Set the LAN IP address of Router 2 to a different address yet on the same net segment as Router 1.
As shown below:
Router 1:
LAN IP: 192.168.0.1;
Subnet Mask: 255.255.255.0;
Router 2:
LAN IP：192.168.0.10;
Subnet Mask: 255.255.255.0;
Then do as follows:
1. Configure Router 2:
1) Wireless Working Mode: Select WDS Bridge Mode.
2) Click Open Scan to search for Router 1.
.
25
User Guide