Tenda FH305 User Manual page 20

Internet connection Type: Displays the current Internet connection type.

PPTP Server Address: Enter the IP address of a PPTP server.

User Name: Enter your PPTP User Name.

Password: Enter the password.

MTU: Maximum Transmission Unit. DO NOT change it from the factory default of 1492 unless instructed by your ISP. You may need to

change it for optimal performance with some specific websites or application software that cannot be opened or enabled; in this case, try
1450, 1400, etc.
Address Mode: Select "Dynamic" if you don't get any IP info from your ISP, otherwise select "Static". Consult your ISP if you are not

clear.
IP Address: Enter the IP address provided by your ISP. Consult your ISP if you are not clear.

Subnet mask: Enter the subnet mask provided by your ISP.

Gateway: Enter the WAN Gateway provided by your ISP. Consult your ISP if you are not clear.

L2TP
Select L2TP (Layer 2 Tunneling Protocol) if your ISP uses an L2TP connection. The L2TP connects your router to a L2TP server.
For Example：
A corporate branch and headquarter can use this connection type to implement mutual and secure access to each other's resources.
Internet connection Type: Displays the current Internet connection type.

L2TP Server Address: Enter the IP address of a L2TP server.

User Name: Enter your L2TP username.

Password: Enter the password.

MTU: Maximum Transmission Unit. DO NOT change it from the factory default of 1492 unless instructed by your ISP. You may need to

change it for optimal performance with some specific websites or application software that cannot be opened or enabled; in this case, try
.
13
User Guide