Important Notices; Fcc Regulations; Installing The Hand Strap - CipherLab M0010 Manual

INSTALLING THE HAND STRAP

The hand strap is ideal for one-handed operation, which requires safe and
convenient hold of the mobile computer.
Warning: Always make sure the hand strap is well hooked and screwed to the
back of the mobile computer before use.
When the hand strap is desired, install it to the mobile computer by following these
steps:
1) Place the mobile computer face down on a flat and clean surface.
2) Screw one end of the hand strap to the back of the mobile computer.
3) Insert and hook the other end of the hand strap to the bottom of the mobile
computer.
4) Make sure the hand strap is securely attached to the mobile computer.
5) Adjust the length of the hand strap to suit your handbreadth.
Figure 2: Installing the
Hand Strap
3