Adjusting The Backlight - CipherLab M0010 Manual

Terminal Reference Manual
The LED backlight of screen, which helps ease reading under dim environments, can
be controlled manually and automatically.
Warning: Using backlight while on battery power will substantially reduce battery
life. It is suggested to dim the backlight while working in a well-lit area or
automatically turn off the mobile computer when not in use.

1.4.1 ADJUSTING THE BACKLIGHT

PRESS FIRST, AND THEN
The LED backlight of the screen can be turned on and adjusted decreasingly by the
key combination: [Func] + [-]. Keep pressing the key combination ([Func] first, and
then [-]) until the luminosity is decreased to a desired level.
PRESS FIRST, AND THEN
The LED backlight of the screen can be turned on and adjusted increasingly by the
key combination: [Func] + [.]. Keep pressing the key combination ([Func] first, and
then [.]) until the luminosity is increased to a desired level.
START > SETTINGS > CONTROL PANEL AND DOUBLE-TAP THE DISPLAY ICON
1) Tap the Backlight tab (left below).
2) Select one or both of the check boxes to automatically turn off the LCD backlight
when using batteries or external power. From the appropriate list, select the
amount of time the device should be idle before the backlight is turned off.
22