CipherLab M0010 Manual page 24

Terminal Reference Manual
Stop wireless connectivity, Bluetooth, or 802.11b that is not in use. Refer to the
Wireless Power Manager.
To save power, go to Start > Settings > Control Panel and select Display (for
backlight settings) or select Power (for power schemes).
Warning: Using backlight, wireless connectivity, and peripherals while on battery
power will substantially reduce battery life.
START > SETTINGS > CONTROL PANEL AND DOUBLE-TAP THE POWER ICON
1) In the Battery tab (left below), you can always monitor the charging status.
2) Tap the Schemes tab (right above).
3) Select the desired power scheme and options for suspending operation when not
in use. The system can be set to three different states to conserve power:
User Idle state
System Idle state
Suspend state
The time choices represent the amount of time that must pass before the system
will switch to the next power conservation state.
START > SETTINGS > CONTROL PANEL AND DOUBLE-TAP THE DISPLAY ICON
To conserve more power, you may go to Start > Settings > Control Panel and
double-tap the Display icon to configure the backlight setting. Refer to section 1.4.1
Adjusting the Backlight.
14