Using The Terminal; Battery - CipherLab M0010 Manual

USING THE TERMINAL

This chapter explains the features and usage of the terminal.
IN THIS CHAPTER
1.1 Battery ........................................................................................ 9
1.2 Memory .................................................................................... 15
1.3 Keypad..................................................................................... 18
1.4 Touch Screen........................................................................... 21
1.5 Notifications............................................................................. 24
1.6 Data Capture.......................................................................... 26
1.7 Communications .................................................................... 26

1.1 BATTERY

Main Battery
The terminal is powered by a rechargeable 3.7 V/1800 mAh Li-ion battery pack,
and it takes approximately 4 hours to fully charge it. However, the charging time
may vary by working condition. During normal operation, the mobile computer
can work for up to 10 hours.
Backup Battery
The backup battery on the main board takes charge when the main battery is
removed or drained out. When fully charged, the 3.7 V/70 mAh rechargeable
Lithium button cell helps retain data in SRAM and maintain the system running in
suspend mode for at least 20 hours without the main battery. In the meantime,
you have to replace the main battery as soon as possible.
Chapter 1
9