Poe - Lancom GS-1224P Manual

LANCOM GS-1224 and LANCOM GS-1224P
Chapter 4: Operation of Web- based Management
Medium
Twisted Pair
1 Gbit-Faser
4.2.3

PoE

LANCOM GS-1224P PoE Status
only
24
Mode:
Set the speed and duplex of the port. If the media is 1Gbps fiber glass,
there are three modes to choose: Auto Speed, 1000 Full and Disable. If
the media is TP, the Speed/Duplex is comprised of the combination of
speed mode, 10/100/1000Mbps and duplex mode, full duplex and half
duplex. The following table summarizes the functions the media supports:
NWay
ON/OFF
ON/OFF
Flow Control:
You can tick the check box to enable flow control. If flow control is set to
Enable, both parties can send a PAUSE frame to the transmitting device(s)
if the receiving port is too busy to handle. When it is set to Disable, there
will be no flow control in the port. It drops the packet if there is too much
traffic.
Default: Disable
Flow Control status:
To display the Flow control status.
Displays the information about the PoE status.
Speed Duplex
10/100/1000M Full for all, Half for 10/100
1000M Full