Lancom GS-1224P Manual page 22

LANCOM GS-1224 and LANCOM GS-1224P
Chapter 4: Operation of Web- based Management
Hardware Version:
The hardware version of this switch.
MAC Address:
It is the Ethernet MAC address of the management agent in this switch.
Serial Number:
The serial number assigned by the manufacturer.
Active IP Address:
Shows the active IP address of this switch.
Active Subnet Mask:
Shows the active subnet mask of this switch.
Active Gateway:
Shows the active gateway of this switch.
DHCP Server:
Shows the IP address of the DHCP server.
Lease Time Left:
Show the lease time left of DHCP client.
Device Name:
Set a special name for this switch. Up to 16 characters are allowed in this
parameter. Any alphanumeric character and zero are acceptable.
Default: no default
DHCP Enabled:
You can enable the automatic delivery of an IP address and activate
further adress information via DHCP.
Default: enabled
Fallback IP Address:
Fill in an IP address, which is used by the device, if DHCP is disabled or
the DHCP server is not accessible.
Default: 172.23.56.250
Fallback Subnet Mask:
Fill in a subnet mask, which is used by the device, if DHCP is disabled or
the DHCP server is not accessible.
Default: 255.255.255.0
21