LANCOM GS-1224 and LANCOM GS-1224P
Chapter 4: Operation of Web- based Management
4.4
Maintenance
In this section the functions are described for maintaining the switch.
4.4.1
Warm Restart
Warm restart provides the function to restart the device.
C
64
Count:
Use the drop-down menu to set the number of echo requests to send.
Four type of number are possible: 1, 5, 10 and 20.
Default: 1
Time Out (in secs):
Use the drop-down menu to set the number of echo requests time out
in second. Four type numbers are possible: 1, 5,10 and 20.
Default: 1
NOTE: You need to press Apply to start after you set the parameters.
Ping Results:
Target IP address:
Shows the active target IP address.
Status:
Shows the result of the ping status.
Received replies:
Shows the received replies number of times.
Request timeouts:
Shows the timeout of request.
Average Response times (In ms):
Shows the average response time in milliseconds.
After upgrading software, you must restart the switch to have the new
configuration taken in effect.