Lancom GS-1224P Manual page 56

LANCOM GS-1224 and LANCOM GS-1224P
Chapter 4: Operation of Web- based Management
must have the same community name. Once completing the setting, click
Apply and the setting takes effect.
Parameter:
SNMP enable:
Enables or disables SNMP.
Default: Enabled
Get/Set/Trap Community:
The community name is used as password for authenticating if the
requesting network management unit belongs to the same community
group. If they both don't have the same community name, they don't
belong to the same group. Hence, the requesting network management
unit cannot access the device with a different community name via the
SNMP protocol; If they both have the same community name, they can
talk to each other.
The community name is user-definable variable with a maximum length
of 15 characters and is case sensitive. It is not allowed to put any blank in
the community name string. Any printable character is allowable. The
community name for each function works independently. Each function
has its own community name. Say, the community name for READ only
works for the READ function and can't be applied to other functions such
as WRITE or TRAP.
Default SNMP function : enable
Default community name for Get: public
55