Table of Contents
Advertisement
2
Hardware Configuration
2.1.2
SSD Installation
To replace the SSD, follow the instructions below for installation.
AMI220
1. Turn your device upside down and loosen a screw as illustrated.
2. Pull up the door, install your SSD onto the bay, and connect related cables.
3. Push down the door and tighten the screw.
AMI221 / AMI222
st
For the 1
(default) SSD:
(This is illustrated by the example of AMI221.)
1. Loosen 4 screws, take out the original 2.5" SSD and attach a new one after
you disassemble the device bottom cover.
2. Secure the SSD with the 4 screws mentioned above.
AMI220 / 221 / 222 User Manual
23
Advertisement
Table of Contents
