Table of Contents
Advertisement
1.3
Certification Marks Attached to the Instrument
The standard certification marks attached to the instrument and their meanings are summarized below.
Additional certification marks if required for specific markets are at the back of this manual.
Electrical equipment marked with this symbol may not be disposed of in
European domestic or public disposal systems. Return old or end-of-life
equipment to the manufacturer for disposal at no charge to the user.
This mark, which stands for European Conformity "Conformité
Européene", indicates that "The instrument complies with the
European
environmental protection legislations".
If these marks are displayed on the instrument, they indicate
that "This product has been tested to Safety Requirements
Conforms to
of Electrical Equipment for Measurements, Control and
ANSI/UL Std. 61010-1
Laboratory use; Part 1: General Requirements of ANSI/UL
61010-1 and CAN/CSA-C22.2 No 61010-1". Intertek ETL listed
Certified to
mark, which stands for Electrical Testing Laboratories, identifies
CAN/CSA Std. 61010-1
that the product has been tested by Intertek, found in
compliance with accepted national standards, and it meets the
minimal requirements required for sale or distribution.
product
directives,
health,
safety
and
Page 7
Advertisement
Table of Contents
