Table of Contents
Advertisement
1.3
Certification Marks Attached to the Instrument
The certification marks attached to the instrument and their meanings are summarized below.
This mark, which stands for European Conformity "Conformité
Européene", indicates that "The instrument complies with the
European
product
environmental protection legislations". See Section
Declaration of Conformity and Certification
If these marks are displayed on the instrument, they indicate that
"This product has been tested to the Safety Requirements for
Electrical
Equipment
Laboratory Use; Part 1: General Requirements of ANSI/UL
61010-1 and CAN/CSA-C22.2 No. 61010-1, second edition, 12
July 2004 including revision 22 July 2005". Intertek ETL listed
mark, which stands for Electrical Testing Laboratories, identifies
that the product has been tested by Intertek, found in compliance
with accepted national standards, and it meets the minimal
requirements required for sale or distribution.
directives,
health,
for
Measurement,
safety
and
12.1
for details.
Control
and
Page 7
Advertisement
Table of Contents
