Certification - Hach 2100P ISO Manual

CERTIFICATION

Hach Company certifies this instrument was tested thoroughly,
inspected and found to meet its published specifications when it was
shipped from the factory.
The Model 2100P ISO Portable Turbidimeter has been tested and is
certified as indicated to the following instrumentation standards:
Product Safety
External Power Supplies Only:
115 V ac Supply, UL Listed & CSA Certified, or
230 V ac Supply, CE Marked per 73/23/EEC, VDE Listed
EMI Immunity:
Instrument Tested with external 230 V, 50 Hz Power Supply:
Per 89/336/EEC EMC: EN 61326:1998 (Electrical Equipment for
measurement, control and laboratory use—EMC requirements)
Supporting test records by Hach Company, certified compliance by
Hach Company.
Standards include:
IEC 1000-4-2:1995 (EN 61000-4-2:1995) Electro-Static Discharge
Immunity (Criteria B)
IEC 1000-4-3:1995 (EN 61000-4-3:1996) Radiated RF Electro-
Magnetic Field Immunity (Criteria B)
IEC 1000-4-4:1995 (EN 61000-4-5:1995) Electrical Fast
Transients/Burst (Criteria B)
IEC 1000-4-5:1995 (EN 61000-4-5:1995) Surge (Criteria B)
IEC 1000-4-6:1996 (EN 61000-4-6:1996) Conducted Disturbances
Induced by RF Fields (Criteria A)
IEC 1000-4-11:1994 (EN 61000-4-11:1994) Voltage Dip/Short
Interruptions (Criteria B)
Emissions
Instrument Tested with the external 230 V, 50 Hz Power Supply:
Per 89/336/EEC EMC: EN 61326:1998 (Electrical Equipment for
measurement, control and laboratory use—EMC requirements)
Class "B" emission limits. Supporting test records by Hewlett Packard,
Fort Collins, Colorado Hardware Test Center (A2LA # 0905-01)
certified compliance by Hach Company.
5