Logic Controls PDX3 Series User Manual page 50

30. Select international sign font <1B> <66> <n>
n International Font Set
A American
G German
I Italian
J Japanese
U British
F French
S Spanish
31. Select international font code <1B> <63> <n>
n International Font Set
A Compliance with ASCII code
J Compliance with JIS code
32. Store user-defined character in EEPROM <1B> <73> <01>
This command is successful when the display is selected under command <ESC>=<03>.
If EEPROM is not supported, this command is ignored.
33. Restore user-defined character from EEPROM <1B> <64> <01>
Restore user-defined characters from EEPROM, and the user-defined characters will be
selected. If EEPROM is not supported, this command is ignored.
34. Select peripheral device <1B> <3D> <n>
Select peripheral device.
n = <01> display disable next device enable.
n = <02> display enable next device disable.
n = <03> display enable next device enable.
<Data>:
More than 20 characters will be displayed on dumb terminal mode.
<Data1>:
More than 45 characters will be displayed on dumb terminal mode.
n International Font Set
N Norwegian
W Swedish
D Danish I
E Danish II
L Slavonic
R Russian
reserved
n International Font Set
R Compliance with RUSSIAN code
L Compliance with SLAVONIC code
47