Logic Controls PDX3 Series User Manual page 38

20. Specify overwrite mode <1F> <01>
Set the screen display mode to the overwrite mode.
21. Specify Vertical Scroll Mode <1F> <02>
Set the screen display mode to the vertical scroll mode.
22. Specify Horizontal Scroll Mode <1F> <03>
Set the screen display mode to the horizontal scroll mode.
23. Turns Blinking On / Off <1F> <45> <n>
Turn blinking of the display screen on or off.
n specifies the blinking interval such that the on-time and off-time will both be about n x
50 ms. The on-time and off-time interval is repeated.
24. Setting and display of time counter <1F> <54> <h> <m>
Set the time and displays it at the bottom right corner.
h: hour, m: minute.
Range:
0 ≤ h ≤ 23
0 ≤ m ≤ 59
25. Display of Time Counter <1F> <55>
Display the timer at the bottom right corner. After displaying the time, the cursor will
return to the home position.
26. Brightness Level <1F> <58> <n>
Brightness level (n = level).
n = <01>, 20%
n = <02>, 40%
n = <03>, 60%
n = <04>, 100%. Default mode.
27. Select / Cancel reverse characters <1F> <72> <n>
Select / Cancel reverse display mode.
n = <01>, Reverse.
n = <00>, Cancel (normal).
28. Set cursor ON / OFF <1F> <43> <n>
Set cursor on or off
n = <00> cursor is set to OFF
n = <01> cursor is set to ON
35