Logic Controls PDX3 Series User Manual page 31

13. Clear To End Of Line <18>
Clear To End Of Line. This command will clear out the display from the current write-
in position to the end of the current line.
14. Clear To End Of Display <19>
Clear To End Of Display. This command will clear out the display from the current
write-in position to the end of the second line.
15. Select Font <1A> <n>
Select Font n.
n = <01> PC437 - American.
n = <02> PC437 - British.
n = <03> PC850 - German.
n = <04> PC850 - French.
n = <05> PC863 - French Canadian.
n = <06> PC850 - Spanish.
n = <07> PD220XL.
16. Clear Display <1E>
Clear Display. These commands are used to clear the display and move the cursor to the
home position without changing any modes in effect.
17. Cursor On <13> or (19) or {^S}
Turn on the cursor.
18. Cursor Off <14> or (20) or {^T}
Turn off the cursor.
28