Subscribe to Our Youtube Channel
Related Manuals for Logic Controls PD3000
Summary of Contents for Logic Controls PD3000
-
Page 1: User Manual
Models: PD3000/PD6000 Series Customer Displays 2 by 20 character display USER MANUAL... - Page 2 NOTICE The manufacturer of the POS pole display makes no representations or warranties, either expressed or implied, by or with respect to anything in this manual, and shall not be liable for any implied warranties of fitness for a particular purpose or for any indirect, special or consequential damages.
-
Page 3: Table Of Contents
TABLE OF CONTENTS FEATURES ...1 MODEL IDENTIFICATION...2 CARTON CONTENTS ...2 INSTALLATION...3 FUNCTIONAL TEST ...5 INTERFACE CONNECTION...8 SOFTWARE COMMANDS ...10 HARDWARE CONFIGURATION ...11 DISPLAY CHARACTER CODES ...12 GENERAL SPECIFICATIONS ...13... -
Page 4: Features
FEATURES The PD3000/PD6000 family of pole displays offers a wide range of high quality features and models to choice from. Listed below are the features incorporated into each pole display. Not all features are available in all models. The model identification chart will assist you in selecting the model best suited to your needs. -
Page 5: Model Identification
MODEL IDENTIFICATION PD6 __ __ __ - __ __ COMMAND SET 0 = LOGIC CONTROLS* 1 = LOGIC CONTROLS WITH PASS-THRU 2 = SPECIAL COMMAND SET 1 (Aedex emulation) 3 = SEPCIAL COMMAND SET 2 (Noritaki emulation) 4 = SPECIAL COMMAND SET 3 (Epson D202 emulation) -
Page 6: Installation
INSTALLATION Your PD3000/PD6000 family of pole displays has been pre- assembled to make the installation as simple as possible. Serial Interface Non-pass-thru Models Installation 1. Mount the pole display to the metal base plate using the mounting hardware provided. 2. The pole display can be used in a freestanding mode or attached to the counter using the remaining mounting hardware. - Page 7 Serial Interface Pass-thru Models Installation 1 Mount the pole display to the metal base plate using the mounting hardware provided. 2 The pole display can be used in a freestanding mode or attached to the counter using the remaining mounting hardware.
-
Page 8: Functional Test
Type “MODE COM1 96,N,8,1” and press the ENTER key. Type “TYPE CON>COM1” and press the ENTER key. PD3000, PD3300, PD3400, PD3500, PD3900, PD6000, PD6300, PD6400, PD6500 and PD6900 1. Type “ABCDEFGH” and press ENTER key. The display will show “ABCDEFGH”... - Page 9 PD3100-PT, PD3300-PT, PD3400-PT, PD3500-PT, PD6100-PT, PD6300-PT, PD6400-PT and PD6500-PT 1. Type “ABCDEFGH” and press ENTER key. The display will show “ABCDEFGH” on the first line. 2. Type “^APASSTHRU” ( ^A represents Ctrl-A ) and press ENTER key. The data will be passed through to the peripheral (e.g. a printer).
- Page 10 PD3190-PT, PD3390-PT, PD3490-PT, PD3590-PT, PD6190-PT, PD6390-PT, PD6490-PT and PD6590-PT 1. Type “ECHO ABCDEFGH>LPT1” and press ENTER key. The display will show “ABCDEFGH” on the first line. 2. Type “ECHO ^APASSTHRU>LPT1” (^A represents Ctrl-A) and press ENTER key. The data will be passed through to the peripheral (e.g.
- Page 11 Parallel Interface Connector Configuration All standard parallel pole displays will have a DB25 male connector. It is connected to the printer port of the computer. –Strobe Data 0 Data 1 Data 2 Data 3 Data 4 Data 5 Data 6 Data 7 –Ack Busy...
-
Page 12: Software Commands
SOFTWARE COMMANDS Logic Controls pole displays are controlled by command codes and data from the computer. The model of pole display that you have will determine which command set works with your pole. Refer to the model identification chart for further information. -
Page 13: Hardware Configuration
HARDWARE CONFIGURATION Serial pole displays were factory configured for serial RS232C interface using the following protocol: · 9600 Baud Rate · 8 Data Bits · 1 Stop Bit · No Parity Other optional baud rates are available with factory settings. Refer to the model identification chart for further information. -
Page 14: Display Character Codes
DISPLAY CHARACTER CODES D3 D2 D1 D0 DIM DC4 " & ’ < > ‘... -
Page 15: General Specifications
Relative Humidity Vibration (10 to 55 Hz.) Shock CABLES & CONNECTORS: Serial Display cable Interface cable Power adapter Parallel Display cable PD3000 PD6000 5 x 7 plus underline 5X7 plus comma 0.20in. (5.0mm 0.44in. (11.25mm) 0.14in. (3.5mm) 0.28in. (7.2mm) ASCII ASCII...
Need help?
Do you have a question about the PD3000 and is the answer not in the manual?
Questions and answers