Logic Controls PDX3 Series User Manual page 16

The pole display will show:
NOTE:
If the pole display shows:
The command set downloading is NOT successful. Do the steps 1 – 5 again. The baud rate
must be 9600 if a serial interface used.
xxxxx
xxxxx = Name of command set.
Example: <LCI> for Logic Controls
Vyy.yy = Firmware version of the pole display.
zzzzz = Serial port baud rate if NOT USB interface
DOWNLOADING FAILURE
Boot
zzzzz
13
Vyy.yy
zzzzz
Vyy.yy