Inserting A Memory Card; Formatting A Card; Connecting To Your Computer - Mio 5415N5780005 User Manual

Inserting a memory card

Note:
DO NOT apply pressure to the centre of the memory card.
l
MiTAC does not guarantee the product's compatibility with memory cards from all manufacturers.
l
Before you start recording, please format the memory card to avoid malfunction caused by files not
l
created by the dash cam.
Turn the device off before removing the memory card.
l
You must insert a memory card (not supplied) before you
can start recording. The dash cam supports the Class 10
memory cards with 8 GB – 128 GB capacity. You should use
separate MicroSD cards for recording and for regular data
storage.
Hold the card (MicroSD) by the edges and gently insert it
into the slot as shown in the illustration.
To remove a card, gently push the top edge of the card
inwards to release it and pull it out of the slot.

Formatting a card

To format a memory card (all data will be erased), press

Connecting to your computer

You can connect the dash cam to your
computer to access data on the memory
card. Connect the dash cam to the
computer via a USB cable (not supplied).
8
and select Format.