Look Profile Menu - OSEE LCM170-E Series User Manual

when detecting no signal input or signal disappeared, the auto standby will be
activated, and there will be a prompt during the process, as shown in Figure
4.1-32:
Figure 4.1-32 Entering the Auto Standby Mode
When detecting no signal input or signal disappeared, the power indicator will
be lit in flash green for 10 seconds, and showing the standby prompt, after that,
the monitor screen will be turned off, and it will be in auto standby mode, the
POWER indicator is lit in red. Then, if the signal input is restored, the monitor
screen will recover and lit up automatically.
 OFF: set AUTO STANDBY as OFF to disable the auto standby mode.
Press POWER button when the monitor is in operation mode, it will power off the
monitor, otherwise, press POWER button when the monitor is off, thus it will
power on the monitor, and the POWER indicator is lit in green.

4.1.8 LOOK PROFILE Menu

The LOOK PROFILE menu provides versatile color spaces, the items are used to
switch to distinctive LOOK PROFILE feature and adjust color balance parameters, as
shown in Figure 4.1-33:
STATUS
INPUT SELECT
MARKER
AUDIO
DISPLAY
CLOSED CAPTION
CONFIG
LOOK PROFILE
FUNCTION KEY
KEY INHIBIT
The relationship of Items, Default Value, Domain Range and Description of the
sub-item is as shown in Table 4.1-9:
Table 4.1-9 The Description of LOOK PROFILE Menu Items
Going into Standby Mode
MAIN
LOOK PROFILE
RED GAIN
GREEN GAIN
BLUE GAIN
RED BIAS
GREEN BIAS
BLUE BIAS
RESET
USER LUT NAME
Figure 4.1-33 LOOK PROFILE Menu
LOOK PROFILE
49
Menu Operations
D65 Rec709
128
128
128
0
0
0
XXXXXXXXXXXX