Spectral Payout Connection; Smart Ticket Connection; Checking The Supply Voltage; Communication With The Host - Innovative Technology NV200S Spectral User Manual

Table of Contents

User Manual – NV200 Spectral

<< Back to Contents

8.3.3 Spectral Payout Connection

The Spectral Payout has a 16-pin molex

connector and a USB Type B socket.

These connectors are located on the

rear of the module at the bottom

The SMART Ticket uses the same 16

pin molex connector as the Spectral

Payout, additional pins need to be

populated to carry communications to

both the NV200 Spectral and printer.

More details of this can be found in

Section 6.2

An additional 4-pin molex connector is

required for power, both must be

connected before the unit will identify

as a Smart Ticket. When power is

supplied to the ticket the LED on the

rear will be illuminated.

If the power supply seems to be powered and connections to the unit are in place,

yet the unit isn't powered, check the voltage output from the power supply is

sufficient and the polarity is correct. If this isn't the issue replace the cable as it may

have been damaged. Should this not resolve the issue, contact your local repair

centre, details of which can be found on our website.

If there is no communication with the host check the communication cable, typically

this will be the IF17 and the port on the host system.

Ensure the cable is connected to the IF17 correctly, so the connectors are fully

seated, and the USB cable is connected to the computer.

Doc: User Manual NV200 Spectral

Version: 2.1

Page 67 of 95

Table of Contents