Operating Instructions - German pool PAC-215 User Manual

Installation Instructions
Window Slider kit Installation
1: Parts:
A) Panel
B) Panel with one hole
C) Panel without hole (maybe not supplied)
D) Screw to lock window kit in place
2: Assembly:
Slide Panel B and C into Panel A and size to
window width. Windows sizes vary. When sizing
the window width, be sure that the window kit
assembly is free from gaps and/or air pockets
when taking measurements.
3: Lock the screw into the holes that corre-
spond to the width that your window requires to
ensure that there are no gaps or air pockets in
the window kit assembly after installation.
LOCATION
• The unit should be placed on a firm foundation to
minimize noise and vibration. For safe and secure
positioning, place the unit on a smooth, level floor
strong enough to support the unit.
• The unit has casters to aid placement, but it
should only be rolled on smooth, flat surfaces. Use
caution when rolling on carpeted surfaces and
hardwood floors. Do not attempt to roll the unit over
objects.
• The unit must be placed within reach of a prop-
erly rated grounded socket.
• Never place any obstacles around the air inlet or
outlet of the unit.
• Allow at least 30cm of space away from the wall
for efficient air conditioning.
• The hose can be extended, but it is optimized
when the hose is at minimum length. Also make
sure that the hose does not have any sharp bends
or sags.
P.10

Operating Instructions

DISPLAY
1 COOL symbol
2 HEAT symbol
3 FAN Speed indicator
4 TIMER symbol
5 Temperature symbol
6 Temperature indicator
1
OPERATING FROM THE CONCTROL PANEL
The control panel is on the top of the appliance, enables you to manage part of the functions without
the remote controller, but to fully utilize its potential, you must use the remote controller.
1 ON/OFF button
2 MODE button
3 FAN button
4 INCREASE button
5 DECREASE button
TURNING THE APPLIANCE ON
Plug into the main socket, then the appliance is on standby.
Press the button to turn the appliance on. The last function active when it was turned off will ap-
pear.
Warning
Never turn the appliance off by unplugging from the socket. Always press the button
for a few minutes before unplugging. This allows the appliance to perform a cycle of checks to verify
operation.
6 5
Watch the video clip
4
3
2
1
3
FAN MODE
ON/OFF
5
, then wait
P.11
2
4