Table of Contents
Advertisement
REMOTE CONTROL
Operating procedures
General procedure:
1. After power is turned on, there is a warning buzzer. Status indicators of indoor unit will light up for a
few seconds. Then they will automatically turned off, except the POWER/RUN light.
The POWER/RUN running light turns red, the unit is in standby status (NOTE: Each time when power
on or receive the signals from the wireless remote control, the buzzer will sound).
2. Press ON/OFF button on the wireless remote control, POWER/RUN indicator turns green, and display
the running mode and setting temp.etc, the unit starts to run (NOTE: if set the SLEEP function or turn
off the light button, all the displays will be turned off except the POWER/RUN indicator).
3. Press MODE, select the desirable running modes.
4. When press SWING button, the guide louver will swing automatically, when repressed the button, it
will stop.
5. Press FAN button, set the fan speed.
6. Then press Temp-UP/ Temp-DN button, to set the desired temperature.
Special procedure:
7. Press SLEEP button, to set the sleep function.
8. Press T-OFF/T-ON button, then press H-UP/H-DOWN button, to set the schedule time of turning on or
turning off.
Note: When select the AUTO mode, the unit choose the suitable running modes, automatically, and can
obtain the comfortable effect.
Changing batteries
The wireless remote control adopts two No.7 alkaline dry cells.
1. Slide the cell cover downward to take out the worn cells,
then change two new ones (note to the correct polarity).
2. Cover the cell cover.
NOTE:
Do not mix new and worn batteries or
batteries of different types.
If the wireless remote control would not
be used for weeks, please take out
batteries to prevent liquid leakage from
damaging it.
Make sure you are within its receiving
range when operating the wireless remote
control.
Then wireless remote control should be
placed about 1m or more away from the
TV or any other electric appliances.
ACL Insert two
No. 7 batteries
P.16
Cell cover
Advertisement
Table of Contents
