Excalibur RS-140-DP Operation Manual

Excalibur RS-140-DP Operation Manual

Deluxe keyless entry & remote start

Advertisement

Quick Links

RS-140-DP
Deluxe Keyless Entry & Remote Start
December 5, 2011
Operation Guide
Temporary cover. Color cover is in a separate file.

Advertisement

Table of Contents
loading

Summary of Contents for Excalibur RS-140-DP

  • Page 1 RS-140-DP Deluxe Keyless Entry & Remote Start December 5, 2011 Operation Guide Temporary cover. Color cover is in a separate file.
  • Page 2: Table Of Contents

    Table Of Contents Introduction ....................3 Remote Starting..................3 Other Remote Start Features ..............4 Low Battery/Low Temp Automatic Starting ........4 Turbo Timer Feature ................4 Pit-Stop Feature ................4 The Status Light ..................5 Using The Valet Switch ................6 Programming Features ................6 User Programmable Features ...............7 Installer Programmable Features ............8 Programmable Features Matrix ............
  • Page 3: Introduction

    Introduction Congratulations on your purchase of this convenience system by Omega Research & Development, Inc., a world leader in vehicle security and conveince products since 1975. This system is designed to offer ease of use and it’s modular design allows for many features to be customiz- able to suit your needs.
  • Page 4: Other Remote Start Features

    Other Remote Start Features LOw BaTTERy/LOw TEmP auTOmaTIC STaRTING This feature will automatically start the engine should the vehicle battery drop below 11 volts or the interior temperature drop to 15 (or 32) degrees fahrenheit. This feature is very useful when the vehicle is parked for a long period of time in cold climates.
  • Page 5: The Status Light

    The Status Light The Status Light helps to visually confirms the status of the system and provides a high level of visual deterrence. The Status Light is located in the window mount receiver unit. Normal System Status 1) Off = The remote starter system is off, in standby mode. 2) On Constant = The system is in the Valet Mode, with the remote starter system disabled.
  • Page 6: Using The Valet Switch

    using The Valet Switch The valet switch is a push button located in the dash area of your car. The specific location is chosen by the installer. If you do not know the specific location of your valet switch, contact your installing dealer. Valet mode Valet mode prevents the remote start feature from being activated. It should be used, for example, when you have your vehicle serviced. To engage Valet mode: • Press and hold the Valet Switch for 3 seconds; the Status Light will turn on and stay on to indicate Valet Mode.
  • Page 7: User Programmable Features

    user Programmable Features This group of User Programmable Features are all accessed as a group in the first level of features’ programming. These features have a direct affect upon the sys- tem’s operations, so the programming and operation of each are described. Feature #1 Remote Start Run Time 10 minutes (press the brake pedal 1 time to program) - DEFauLT 5 minutes (press the brake pedal 2 times to program) 15 minutes...
  • Page 8: Installer Programmable Features

    Installer Programmable Features This group of Installer Programmable Features are all accessed as a group in the second level of features’ programming. These features have a direct affect upon the system’s operations related to the installation and vehicle type aND SHOuLD ONLy BE CHaNGED By THE INSTaLLER!!! Feature #1 Remote Start activation 1 button presses...
  • Page 9 Installer Programmable Features (cont’d) Feature #4 Gasoline Or Diesel Engine Gasoline (press the brake pedal 1 time to program) - DEFauLT Diesel 15 Sec. Delay (press the brake pedal 2 times to program) Diesel 20 Sec. Delay (press the brake pedal 3 times to program) Diesel 30 Sec.
  • Page 10 Installer Programmable Features (cont’d) Feature #8 Low Temp Crank Extender 0ms (Off) (press the brake pedal 1 time to program) 200ms (press the brake pedal 2 times to program) - DEFauLT 300ms (press the brake pedal 3 times to program) 400ms (press the brake pedal 4 times to program) When the vehicle’s interior temperature is below freezing, this feature adds extra...
  • Page 11: Programmable Features Matrix

    Programmable Features matrix User Feature Programming: Ignition on, off, press valet 5 times # Feature Brake Pedal x 1 Brake Pedal x 2 Brake Pedal x 3 Brake Pedal x 4 1 Engine Run Time 10 min 5 min 15 min 20 min 2 Steady/Flashing lights for RS Steady...
  • Page 12 Back Cover Color cover is in a separate file.

Table of Contents