Summary of Contents for Digital Watchdog Blackjack CX DW-BJCX8T-LX
Page 1
Quick Start Guide State-of-the-art hyper-optimized video management platform designed for ease, speed and efficiency. Blackjack® CX™ 16-channel PoE NVR with 8 virtual channels — Up to 80Mbps DW-BJCX8T-LX DW-BJCX16T-LX DW-BJCX24T-LX DW-BJCX32T-LX DW-BJCX40T-LX Default Login Information for DW Spectrum® IPVMS Default login information for the server’s OS Username: admin Password: admin12345 Username: dwuser...
FRONT PANEL Power LED HDD LED 2x USB 2.0 ports PoE status LEDs REAR PANEL Power supply on/off switch Power AC input Power on/off switch PoE ports Mic in Speaker out Line out 2x USB 2.0 ports 1Gb Ethernet port (PoE Uplink) 2x USB 3.1 ports 2.5Gb Ethernet port...
Quick Start Guide SETTING UP THE SERVER STEP 1: Connect external devices, power and network. Connect a monitor, USB keyboard, USB mouse and the LAN side of the network cable to one 2.5Gb Ethernet port (B11 on the diagram). Connect the cameras to the PoE ports when the unit is fully booted to the OS. NOTE See page 2 for detailed back panel breakdown for each model.
Page 4
STEP 2: Configure date and time (cont.) 4. Click Date & Time and set the correct date and time. 5. Click Time Zone and set it to the correct Time Zone (type one of the largest cities in the time zone). 7.
Page 5
Quick Start Guide 5. Restart the connection by switching OFF, then turn it ON. 6. Click Settings of the Ethernet not connected. 7. Change to Manual, then enter Address, Netmask, Gateway and DNS. 8. Click Apply to save. 9. Connect the network cable and verify the connection. NOTE If you are not connecting to the Blackjack from the same network, you may be required to perform...
Page 6
STEP 3: To check for updates Click on the menu then click “System Administration.” 2. Go to the updates tab. If the system requires updating, click on the update system button. If you are on the latest version, it will say “You have the latest version installed,”...
Page 7
Quick Start Guide Click “All” to apply the recording settings to the entire schedule. 6. A red dot will appear next to the camera in the resource tree once the recording is started. NOTE: A Recording License is required to allow each camera to the archive. STEP 6: Backup database Go to the system administration window and click on the general tab.