Table of Contents
Advertisement
ADJUST
Set the camera's like brightness, contrast, color, etc.
①
Click [SET] in the 'ADJUST' section to get to the setup window shown below.
②
Adjust the applicable settings using the drop-down menu options.
③
To make changes to another channel, use the drop-down menu next to "Camera."
④
To make changes to all channels, click [Apply All].
⑤
Click "Save" to save any changes made.
⑥
Click [EXIT] to exit.
4.2.2. AUDIO
Select an audio input and output during live display and match it to a designated channel. The number of
audio channels may differ depending on the DVR model. Users can hear audio sound under both live display
and playback mode, depending on the system setting.
Select "USE 2-WAY AUDIO" to make voice communication between DVR and remote side.
4.2.3. PTZ
Full control of PTZ cameras is available in this menu. For details, please refer to "3.3 PTZ Operation".
Check the below items for proper PTZ operation.
Check if the protocol of the connected PTZ camera is correct.
Check if the communication setting, including baud rate, matches the assigned value for that PTZ
protocol.
Check if the address of the connected PTZ camera is correct.
Check if the camera is connected through RS-485 cables.
Procedure
How to setup PTZ camera with Pelco-D protocol (example)
34
Advertisement
Table of Contents
