System Startup; Button Explanation - Digital Watchdog VMAX AHD CORE DW-VAC44 User Manual

3 | VMAXAHD CORE™ User Manual

System Startup

1.2
After connecting peripheral devices such as cameras, monitors and a mouse to the DVR, power the DVR by
connecting the 12V adaptor to the device. The login window will appear as shown below.
To login, enter the username and password in the popup screen. There is only one Administrator Account
configurablein the DVR. It is assigned with an unchangeable User ID marked as "ADMIN". The factory default
password is "1234". The Administrator account has full access to the DVR and its configurable parameters
such as creating new users and assigning rights to users. If DVR is set as AUTO LOGIN, login process is not
necessary.
Caution
It may take a few minutes to startup the system after turning on the power. If the network is not
connected or the user sets the network configuration as DHCP when no DHCP server is in the
network.
Note
1) Do not forget the administrator's password that was set for the first time. In case the password is
forgotten, please contact your local dealer for help.
2) Refer to the "Section 4.1.2 User" for AUTO LOGIN and AUTO LOGOFF.

Button Explanation

1.3
1.3.1. Front Panel

① Power
② LED Indicator
③ Function Button
④ Direction Button
⑤ Enter Button
⑥ USB Port

*
The picture might differ according to the specification and model
: System ON/OFF
: Indicates system status.(Power, Record and Network status)
: E-Backup, Search, Screen display mode, Menu, Return
: Move to the desired menu position
: Select value or setting
: For backup, upgrade and so on.
   